Sony CHC-CL1 Operating Instructions - Page 24

Hooking up the optional components (continued) To Do this Make a digital Connect a digital cable. recording to a digital component Make an analog Connect the audio cords. recording from an analog component Listen to the Press MD to switch the function connected optional to MD or VIDEO. component Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the system from the wall outlet if it is not to be used for an extended period of time. To disconnect the power cord, pull it out by the plug. Never pull the cord itself. • Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. • AC power cord must be changed only at the qualified service shop. • When you connect the power cord to a wall outlet, even if the power is off, the system begins charging for remote and timer functions. Therefore the surface of this unit become warm, this is normal. On placement • Make sure the system fan is on during use. Place the system in a location with adequate air circulation, and do not place anything on top of the system. • Do not place the system in an inclined position. • Do not place the system in locations where it is: - Extremely hot or cold - Dusty or dirty - Very humid - Subject to vibrations - Subject to direct sunlight. 24