Sony CHC-CL1 Operating Instructions - Page 27
Additional Information, CD Player, Tape Deck, Press PLAY MODE/DIRECTION repeatedly
View all Sony CHC-CL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
The timer does not function. • Press CLOCK/TIMER SELECT on the remote to set the timer and light up "DAILY" or "REC" in the display (see pages 20 and 23). • Check the set contents and set the correct time (see pages 19 and 22). • Cancel the Sleep Timer function (see page 22). • You cannot activate the Daily Timer and recording timer at the same time. The remote does not function. • Remove the obstacle. • Move the remote closer to the system. • Point the remote at the system's sensor. • Replace the batteries (R6/size AA). • Locate the system away from the fluorescent light. "PROTECT" and "PUSH POWER" appear alternately. • Press ?/1 (power) to turn off the system. Turn on the system again after a while. CD Player The CD tray does not close. • Place the CD correctly in the center of the tray. • Always close the tray by pressing CD 1 - 3 Z. Trying to press the tray closed with your fingers may cause problems with the CD player. The CD does not eject. • Consult your nearest Sony dealer. Play does not start. • Open the CD tray and check whether a CD is loaded. • Wipe the CD clean (see page 25). • Replace the CD. • Place the CD correctly in the center of the tray. • Place the CD in the tray with the label side up. • Remove the CD and wipe away the moisture on the CD, then leave the system turned on for a few hours until the moisture evaporates. • Press CD NX to start play. The sound skips. • Wipe the CD clean (see page 25). • Replace the CD. • Try moving the system to a place without vibration (e.g., on top of a stable stand). • Try moving the speakers away from the system, or placing them on separate stands. • When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Play does not start from the first track. • Press PLAY MODE/DIRECTION repeatedly until "PGM" or "SHUFFLE" disappears to return to normal play. "OVER" appears. • You have reached the end of the CD. Press and hold m to return to the desired playing position. Tape Deck The tape does not record. • No cassette is inserted. Insert a cassette. • The tab has been removed from the cassette. Cover the broken tab with adhesive tape (see page 26). • The tape has wound to the end. The tape does not record or play, or there is a decrease in sound level. • The heads are dirty. Clean them. • The record/playback heads are magnetized. Demagnetize them (see page 26). The tape does not erase completely. • The record/playback heads are magnetized. Demagnetize them (see page 26). continued Additional Information 27