Sony CHC-CL1 Operating Instructions - Page 29
Messages - watt
View all Sony CHC-CL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Messages One of the following messages may appear or flash in the display during operation. CD Cannot Edit You tried to label a CD TEXT disc. Name Full There are already 50 disc titles stored in the system. No Disc There is no CD in any of CD 1 - 3. OVER You have reached the end of the CD while pressing M during play or pause. Push STOP! You pressed PLAY MODE/DIRECTION during play. Step Full! You tried to program 26 or more tracks (steps). TAPE No Tab You cannot record the tape because the tab has been removed from the cassette. No Tape There is no tape in the tape deck. Open You performed a tape operation with the tape deck lid not completely shut. Specifications Main Unit (HCD-CL3/CL1) Amplifier section For the U.S. model (HCD-CL1) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6-ohm loads, both channels driven, from 120 - 10,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milli watts to rated output. Total harmonic distortion: less than 0.1% (6 ohms at 1 kHz, 25 W) European models HCD-CL3: DIN power output (Rated):80 + 80 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (Reference): 100 + 100 watts (6 ohms at 1 kHz, 10% THD) Music power output (Reference): 180 + 180 watts (6 ohms at 1 kHz, 10% THD) HCD-CL1: DIN power output (Rated):40 + 40 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (Reference): 50 + 50 watts (6 ohms at 1 kHz, 10% THD) Music power output (Reference): 95 + 95 watts (6 ohms at 1 kHz, 10% THD) continued Additional Information 29