Sony CHC-CL1 Operating Instructions - Page 8
Setting the time, Saving the power in standby mode, Saving Mode
View all Sony CHC-CL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting the time 1 Turn on the system. 2 Press CLOCK/TIMER SET on the remote. Proceed to step 5 when you set the clock for the first time. 3 Turn ./> (or press . or > on the remote) to select "CLOCK SET?". 4 Press ENTER/YES. 5 Turn ./> (or press . or > on the remote) to set the hour. 6 Press M (or ENTER/YES on the remote). The minute indication flashes. 7 Turn ./> (or press . or > on the remote) to set the minute. 8 Press ENTER/YES on the remote. The clock starts working. If you made a mistake Press m or M repeatedly until the incorrect item flashes, then set it again. To change the preset time Start over from step 1. Saving the power in standby mode Press DISPLAY repeatedly when the system is off. Each time you press the button, the system switches cyclically as follows: Demonstration t Clock display t Power Saving Mode To cancel the Power Saving Mode Press DISPLAY once to show the demonstration, twice to show the clock display. Tip ?/1 indicator lights up even in the Power Saving Mode. 8