Sony CHC-CL1 Operating Instructions - Page 22

Timer Falling asleep to music - Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP on the remote. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: SLEEP OFF t AUTO* t 90min t 80min t ... t 10min * The system automatically turns off after the current CD or tape finishes playing (up to 100 minutes). When the function is TUNER, the system turns off in 100 minutes. To Press Check the SLEEP on the remote once. remaining time Change the time SLEEP on the remote to select the to turn off time you want. Cancel the Sleep SLEEP on the remote repeatedly Timer function until "SLEEP OFF" appears. Note Do not set to "AUTO" during Synchro Recording on a tape. Waking up to music - Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the time" on page 8). 1 Prepare the sound source you want to play. • CD: Place a CD. To start from a specific track, make a program (see "Programing CD tracks" on page 11). • Tape: Insert a tape. • Radio: Tune in a station (see "Listening to the radio" on page 15). 2 Turn VOLUME (or press VOL+ or - on the remote) to adjust the volume. 3 Press CLOCK/TIMER SET on the remote. "DAILY SET ?" appears. 4 Press ENTER/YES on the remote. "ON" appears and the hour indication flashes. 5 Set the time to start playing. Turn ./> (or press . or > on the remote) to set the hour, then press ENTER/YES on the remote. The minute indication flashes. Turn ./> (or press . or > on the remote) to set the minute, then press ENTER/YES on the remote. 6 Set the time to stop playing following the procedure in step 5. 22