Sony DVP-NS900V Operating Instructions - Page 27
Connecting to a stereo amplifier receiver and 2 speakers/Connecting to an, MD deck or DAT deck
View all Sony DVP-NS900V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Hookups C Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use C-1 . If the amplifier (receiver) has a digital input jack, use C-2 . When connecting to an MD deck or a DAT deck, use C-2 . In this case, you can also connect the player directly to the MD deck or DAT deck without using your stereo amplifier (receiver). xRecommended surround sound effects for the C-1 connection only •TVS STANDARD (page 60) z In connection C-1 , you can use the supplied audio/video cord instead of using a separate audio cord. z To realize better surround sound effects, make sure that your listening position is in between your speakers. Note SACD audio signals are not output from the digital jack. continued 27