Sony DVP-NS900V Operating Instructions - Page 95
Additional Information, Operation
View all Sony DVP-NS900V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Sound is noisy. , The disc is dirty or flawed. Sound distortion occurs. , Set "AUDIO ATT" in "AUDIO SETUP" to "ON" (page 88). The surround effect is difficult to hear when you are playing a Dolby Digital, or DTS sound track. , Check the speaker connections and setting (page 25, 31, 89) , Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or DTS format. The sound comes from the center speaker only. , Depending on the disc, the sound may come from the center speaker only. , Set "SURROUND" to "OFF" in the Control Menu display (page 60). Operation The remote does not function. , There are obstacles between the remote and the player. , The distance between the remote and the player is too far. , The remote is not pointed at the remote sensor on the player. , The batteries in the remote are weak. The disc does not play. , There is no disc inside. , The disc is turned over. Insert the disc with the playback side facing down on the disc tray. , The disc is skewed. , The player cannot play CD-ROMs, etc. (page 6). , The region code on the DVD does not match the player. , Moisture has condensed inside the player. Remove the disc and leave the player turned on for about half an hour. Turn on the power again before playing the disc (page 3). , The player cannot play DVD-Rs, DVD-RWs, CD-Rs, or CD-RWs that are not finalized. The disc does not start playing from the beginning. , Program Play, Shuffle Play, Repeat Play, or A-B Repeat Play has been selected (page 43). Press CLEAR to cancel these functions before playing a disc. , Resume Play has been selected. During stop, press x on the player or the remote and then start playback (page 39). , Depending upon the disc, the menu may automatically appear on the TV screen. The player starts playing the disc automatically. , The disc features an auto playback function. , "AUTO PLAY" in "CUSTOM SETUP" is set to "TIMER" (page 86). Playback stops automatically. , Some discs may contain an auto pause signal. While playing such a disc, the player stops playback at the auto pause signal. You cannot perform some functions such as Stop, Search, Slow-motion Play, Repeat Play, Shuffle Play, or Program Play. , Depending on the disc, you may not be able to do some of the operations above. See the operating manual that comes with the disc. continued 95 Additional Information