Sony DVP-NS900V Operating Instructions - Page 91
Settings for the Speakers (SPEAKER SETUP), SPEAKER SETUP
View all Sony DVP-NS900V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Settings for the Speakers (SPEAKER SETUP) To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and the balance of the speakers to the same level. This setting is effective when connecting the speaker with 5.1 CH OUTPUT jacks (page 25). Select "SPEAKER SETUP" in the Setup Display. For details on using the display, see "Using the Setup Display" (page 80). The default settings are underlined. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: CENTER: REAR: SUBWOOFER: LARGE LARGE LARGE(REAR) YES To return to the default setting Select the item, then press CLEAR. Note that only the "SIZE" setting does not return to the default setting. xSIZE Selects the size of the speakers to be connected. • FRONT LARGE Normally select this position. SMALL When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the bass redirection circuitry and outputs the bass frequencies of the front speaker from the subwoofer. • CENTER NONE If you do not connect a center speaker, select this. LARGE Normally select this position. SMALL When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers. • REAR NONE If you do not connect rear speakers, select this. LARGE (REAR/SIDE): Normally select this position. Select either of these according to the rear speaker's position*. SMALL (REAR/SIDE): When the sound cracks or the surround sound effects are difficult to hear, select this. Select either of these according to the rear speaker's position*. This activates the bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers. ∗ Rear speaker position Correctly specify the location of the rear speakers to enjoy the surround effect. • Set to the "SIDE," if the location of the rear speakers corresponds to section A below. • Set to the "REAR," if the location of the rear speakers corresponds to section B below. Settings and Adjustments continued 91