Sony DVP-NS900V Operating Instructions - Page 93

SPEAKER SETUP, From your listening position, select

Get Sony DVP-NS900V - Sacd/dvd Player PDF manuals and user guides View all Sony DVP-NS900V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Notes • If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • Do not place the rear speakers farther away from your listening position than the front speakers. • These settings do not affect the SACD Multi audio signals. xBALANCE You can vary the balance of the left and right speakers as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default adjustments are in parentheses. FRONT (0dB) Adjust the balance between the front left and right speakers (- 6dB [L] to +6dB [R], 0.5dB increments). REAR (0dB) Adjust the balance between the rear left and right speakers (- 6dB [L] to +6dB [R], 0.5dB increments). xLEVEL You can vary the level of each speaker as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default adjustments are in parentheses. FRONT (0dB) Adjust the level of the front speakers (-6dB to 0dB, 0.5 dB increments). CENTER (0dB) Adjust the level of the center speaker (-12dB to 0dB, 0.5dB increments). REAR (0dB) Adjust the level of the rear speakers (-12dB to 0dB, 0.5dB increments). SUBWOOFER Adjust the level of the (0dB) subwoofer (-10dB to +10dB, 0.5dB increments). To adjust the volume of all the speakers at one time Use the amplifier's (receiver's) volume control. xTEST TONE The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust the "BALANCE" and "LEVEL." OFF ON The test tone is not emitted from the speakers. The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select one of the "SPEAKER SETUP" items, the test tone is emitted from both left and right speakers simultaneously. Adjusting the speaker volume and level 1 Select "SPEAKER SETUP" in the Setup Display. 2 Select "TEST TONE" and set to "ON." You will hear the test tone from each speaker in sequence. 3 From your listening position, select "BALANCE" or "LEVEL" and adjust the value of "BALANCE" using C/c and "LEVEL" using X/x. The test tone is emitted from both left and right speakers simultaneously. 4 Select "TEST TONE" and set to "OFF" to turn off the test tone. Notes • When you adjust the speaker settings, the sound cuts off for a moment. • The test tone signals are not output from the digital jack. Settings and Adjustments 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Settings and Adjustments
93
Notes
•
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
•
Do not place the rear speakers farther away from
your listening position than the front speakers.
•
These settings do not affect the SACD Multi audio
signals.
x
BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
x
LEVEL
You can vary the level of each speaker as
follows. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the
speakers at one time
Use the amplifier’s (receiver’s) volume control.
x
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust the “BALANCE” and “LEVEL.”
1
Select
“
SPEAKER SETUP
”
in the Setup
Display.
2
Select
“
TEST TONE
”
and set to
“
ON.
”
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
“
BALANCE
”
or
“
LEVEL
”
and adjust the
value of
“
BALANCE
”
using
C
/
c
and
“
LEVEL
”
using
X
/
x
.
The test tone is emitted from both left and
right speakers simultaneously.
4
Select
“
TEST TONE
”
and set to
“
OFF
”
to
turn off the test tone.
Notes
•
When you adjust the speaker settings, the sound cuts
off for a moment.
•
The test tone signals are not output from the digital
jack.
FRONT
(0dB)
Adjust the balance between the
front left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
REAR (0dB)
Adjust the balance between the
rear left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
FRONT (0dB)
Adjust the level of the front
speakers (–6dB to 0dB, 0.5 dB
increments).
CENTER
(0dB)
Adjust the level of the center
speaker (–12dB to 0dB, 0.5dB
increments).
REAR (0dB)
Adjust the level of the rear
speakers (–12dB to 0dB,
0.5dB increments).
SUBWOOFER
(0dB)
Adjust the level of the
subwoofer (–10dB to +10dB,
0.5dB increments).
OFF
The test tone is not emitted from
the speakers.
ON
The test tone is emitted from each
speaker in sequence while
adjusting balance or level.
When you select one of the
“SPEAKER SETUP” items, the
test tone is emitted from both left
and right speakers simultaneously.
Adjusting the speaker volume and level