Sony HVR-Z5E Operation Guide - Page 12
Step 3: Charging the battery pack, After charging the battery, To attach the battery pack
View all Sony HVR-Z5E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step 3: Charging the battery pack You can charge the "InfoLITHIUM" battery pack (L series) with the supplied AC Adaptor/Charger. b Notes • You cannot use batteries other than the "InfoLITHIUM" battery pack (L series) (p. 120). 2 3 4 1 Charge lamp 1 Set the mode change switch to CHARGE. 2 Connect the power cord (mains lead) to the AC Adaptor/Charger. 3 Connect the power cord (mains lead) to the wall outlet (wall socket). 4 Place the battery pack in the slot of the AC Adaptor/Charger, press it down, and slide it in the direction of the arrow as illustrated. The charge lamp turns on and charging starts. 12 After charging the battery All segments of the battery mark ( ) appear in the display window when the normal charge of the battery is completed. You can fully charge the battery pack if you continue charging the battery pack after the charge lamp turns off until the battery mark with "FULL" appears (full charge). The battery life of the fully charged battery is slightly longer than that of the normally charged battery. Remove the battery pack from the AC Adaptor/Charger when the charge is completed. z Tips • You can check the remaining battery life with the battery info function (p. 53). To attach the battery pack Press the battery pack against the back of your camcorder and slide it down.