Sony HVR-Z5E Operation Guide - Page 69
Smooth Wb, Ae Shift, Ae Response, At Iris Lmt, Ecs Freq., Using The Menu, Middle
![]() |
View all Sony HVR-Z5E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Using the Menu MIDDLE LOW Automatically adjusts the white balance while increasing redness or blueness. b Notes • This is only effective when white balance is adjusted automatically. • [ATW SENS] is not effective under a clear sky or the sun. SMOOTH WB You can set the transition speed at which the color temperature values shifts from one value to another, set for the white balance memory switch positions, when you switch the white balance memory switch from a position to another. You can select the transition speed from [FAST], [MIDDLE] and [SLOW] or set to [OFF]. The default setting is [OFF]. AE SHIFT You can set an offset value to adjust the automatic exposure adjustment value between [-7] (dark) and [+7] (bright) with the SEL/PUSH EXEC dial. The default setting is [0] . and selected value appears on the screen when you change the value from the default setting. b Notes • This function is not effective while you adjust the iris, shutter speed and gain all manually. • [AE SHIFT] is canceled when [EXPOSURE] is manually adjusted. • This function is not effective when [HYPER GAIN] is set to [ON]. AE RESPONSE You can select the speed at which the automatic exposure adjustment function follows changes in the brightness of the subject. You can select the speed from [FAST], [MIDDLE] and [SLOW]. The default setting is [FAST]. AT IRIS LMT You can select the highest iris value for the automatic adjustment from [F11], [F9.6], [F8], [F6.8], [F5.6], [F4.8] and [F4]. The default setting is [F11]. b Notes • This function is not effective during the manual iris adjustment. ECS FREQ. You can set the shutter speed so that horizontal strips do not appear on a monitor screen, which is likely to occur when you record a monitor screen. Change the setting with the SEL/PUSH EXEC dial, then press the dial to confirm the setting. The default setting is [50.00Hz] . You must set the shutter speed to the ECS ( ) prior to setting this function (p. 30). You can set the shutter speed in the following frequency ranges depending on the setting of [SCAN TYPE]. How to select [SCAN TYPE] depends on the setting of [REC FORMAT] of (IN/OUT REC) menu. [HDV1080i]: [HDV PROGRE.] t [REC TYPE] t [SCAN TYPE] [DV]: [DV PROGRE.] t [SCAN TYPE] SCAN TYPE Frequency range 50 50.00 Hz to 200.0 Hz 25 25.00 Hz to 200.0 Hz Continued , 69
![](/manual_guide/products/sony-hvrz5e-operation-guide-a1a9584/69.png)