Sony ILCE-9 Instruction Manual Large File - 14.58 MB - Page 103

Shooting Note ••The longer the exposure time, the more noise will be visible on the image. ••After shooting, noise reduction will be done for the same amount of time that the shutter was open. However, you cannot shoot any more while noise reduction is in progress. ••You cannot set the shutter speed to [BULB] in the following situations: --[Auto HDR] --[Picture Effect] is set to [Rich-tone Mono.] --When [Drive Mode] is set to the following: --[Cont. Shooting] --[Self-timer (Cont)] --[Cont. Bracket] --[ Shutter Type] is set to [Electronic Shut.] If you use the above functions when the shutter speed is set to [BULB], the shutter speed is temporarily set to 30 seconds. ••If you set [Drive Mode] to [Cont. Shooting] and [ Shutter Type] to [Auto] or [Electronic Shut.] when the shutter speed is set to [BULB], the shutter speed will be temporarily set to 1/8 seconds. / Recall Allows you to shoot an image after recalling often-used modes or camera settings registered with [ / Memory] in advance. 1 Set the mode dial to 1, 2, or 3 (Memory recall). 2 Press the center of the control wheel to confirm. ••You can also recall registered modes or settings by selecting MENU  (Camera Settings 1)  [ / Recall]. GB 103