Sony ILCE-9 Instruction Manual Large File - 14.58 MB - Page 230

The image is blurred. ••The picture was taken in a dark location without the flash, resulting in camera shake. Camera shake is more likely to occur when shooting in a dark location because the shutter speed is slower. The use of a tripod or the flash is recommended (page 132). ••Make sure that [SteadyShot] is set to [On] (page 127). ••If you are using [SteadyShot Adjust.] set to [Manual], check if the right focal-length is set (page 127). Sound is not recorded properly. ••If you turn down the [Audio Rec Level] to the lowest sound level, audio will not be recorded. ••If you turn up the [Audio Rec Level] to the highest sound level, there will likely be sound clipping. The camera vibrates while the power is on. ••The image sensor moves up/down/left/right due to an in-camera anti-blur mechanism. This is not a malfunction. Vibration or sounds occur when you shake the camera while the power is turned off. ••The image sensor vibrates or makes sounds due to an in-camera image sensor shift mechanism. This is not a malfunction. Viewing images Images cannot be played back. ••The folder/file name has been changed on your computer. ••When an image file has been processed by a computer or when the image file was recorded using a model other than this product, playback on this product is not guaranteed. ••Copy images stored on the computer using PlayMemories Home to play back the images on the camera. ••The product is in USB mode. Disconnect the product from the computer (page 202). GB 230