Sony ILCE-9 Instruction Manual Large File - 14.58 MB - Page 128
Camera Settings 2, current set value of the SteadyShot focal length will display to the side
![]() |
View all Sony ILCE-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Note ••The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera towards a subject, or when the shutter button has been pressed all the way down without stopping halfway. ••When using a tripod, make sure to turn off the SteadyShot function because this can cause any malfunction when shooting. ••[SteadyShot Settings] will be unavailable when MENU (Camera Settings 2) [SteadyShot] is set to [Off]. ••When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set [SteadyShot Adjust.] to [Manual] and set [SteadyS. Focal Len.] to match the lens you are using. The current set value of the SteadyShot focal length will display to the side of . ••When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [SteadyShot Adjust.] to [Manual] and set the focal length. ••When you set [SteadyShot] to [On]/[Off], the SteadyShot settings of the camera and lens switch at the same time. ••If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You cannot switch the settings using the camera. GB 128
![](/manual_guide/products/sony-ilce9-instruction-manual-large-file-1458-mb-042a9a8/128.png)