Sony ILCE-9 Instruction Manual Large File - 14.58 MB - Page 228

Shooting still images/movies No images appear on the viewfinder. ••[FINDER/MONITOR] has been set to [Monitor (Manual)]. Change [FINDER/MONITOR] to [Auto] or [Viewfinder (Manual)] (page 176). ••Bring your eye close to the viewfinder. ••When the monitor is pulled out, the eye sensor of the camera will not detect you are approaching even if [FINDER/MONITOR] is set to [Auto]. The image will continue to be displayed on the monitor. The shutter cannot be released. ••You are using a memory card with a write-protect switch or an accidental erasure prevention switch, and the switch is set to the LOCK position. Set the switch to the record position. ••Check the free capacity of the memory card. ••The lens is not attached properly. Attach the lens properly (page 43). ••When attaching the product to an astronomical telescope, etc., set [Release w/o Lens] to [Enable] (page 212). ••Set [Release w/o Card] to [Enable] (page 212). However, when no memory card has been inserted, the images shot will not be saved. ••The self-timer has been activated. Recording takes a long time. ••The noise reduction function is processing an image. This is not a malfunction. ••You are shooting in RAW mode. Since RAW data files are large, RAW mode shooting may take time. ••The [Auto HDR] function is processing an image. The same image is captured multiple times. ••The drive mode has been set to continuous shooting or bracket shooting. Set the drive mode to [Single Shooting] (page 79). GB 228