Sony ILCE-9 Instruction Manual Large File - 14.58 MB - Page 239

is recommended., camera body.

Page 239 highlights

Hint ••For how to check the amount of dust on the image sensor, and for further details on cleaning methods, please refer to the following URL. http://support.d-imaging.sony.co.jp/www/support/ilc/sensor/index.php Note ••Clean the image sensor quickly. ••A blower is not supplied with this product. Use a commercially available blower. ••Make sure that the remaining battery level is (3 remaining battery icons) or more before performing the cleaning. The use of an AC Adaptor (supplied) is recommended. ••Do not use a spray type blower as it may scatter water droplets inside the camera body. ••Do not put the tip of a blower into the cavity beyond the lens mount area, so that the tip of the blower does not touch the image sensor. ••Hold the camera slightly face downward so that the dust falls out. ••Do not subject the product to any shock during cleaning. ••When cleaning the image sensor with a blower, do not blow too hard. If you blow the sensor too hard, the inside of the product may be damaged. ••If the dust remains even after you cleaned the product as described, consult the service facility. About this product GB 239

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263

About this product
GB
239
About this product
Hint
•For how to check the amount of dust on the image sensor, and for further
details on cleaning methods, please refer to the following URL.
Note
• Clean the image sensor quickly.
•A blower is not supplied with this product. Use a commercially available
blower.
• Make sure that the remaining battery level is
(3 remaining battery icons)
or more before performing the cleaning. The use of an AC Adaptor (supplied)
is recommended.
• Do not use a spray type blower as it may scatter water droplets inside the
camera body.
• Do not put the tip of a blower into the cavity beyond the lens mount area, so
that the tip of the blower does not touch the image sensor.
• Hold the camera slightly face downward so that the dust falls out.
• Do not subject the product to any shock during cleaning.
•When cleaning the image sensor with a blower, do not blow too hard. If you
blow the sensor too hard, the inside of the product may be damaged.
•If the dust remains even after you cleaned the product as described, consult
the service facility.