Sony ILCE-9 Instruction Manual Large File - 14.58 MB - Page 132
Using flash (sold separately), Attach the flash, sold separately to the, product.
View all Sony ILCE-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Using flash (sold separately) In dark environments, use the flash to light up the subject while shooting. Also use the flash to prevent camera-shake. For details on the flash, refer to the instruction manual for the flash. 1 Attach the flash (sold separately) to the product. 2 Shoot after you have turned on the flash and it is fully charged. blinking: Charging is in progress lit up: Charging is finished ••The available flash modes depend on the shooting mode and function. Note ••A flash cannot be used when [ Shutter Type] is set to [Electronic Shut.]. ••A flash can be used during continuous shooting with [ Shutter Type] set to [Auto]. The mechanical shutter will be used. ••The light of the flash may be blocked if the lens hood is attached and the lower part of a recorded image may be shaded. Remove the lens hood. ••When using the flash, stand 1 m or more away from the subject. ••You cannot use the flash when recording movies. (You can use an LED light when using a flash (sold separately) with an LED light.) ••Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe, turn off the product first. When attaching an accessory, make sure that the accessory is fixed securely to the product. GB 132