Sony KDS-70Q006 Owners Guide - Page 132
Remote Control, CableCARD, Problem, Possible Remedies - lamp reset
View all Sony KDS-70Q006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Other Information Remote Control Problem Remote control does not operate Cannot change channels with the remote control Remote control does not operate non-Sony video equipment Possible Remedies ❏ The batteries could be weak. Replace the batteries. ❏ Check the orientation of the batteries. ❏ Press FUNCTION repeatedly until the TV indicator lights up. You may have inadvertently pressed FUNCTION, which changes the remote control to SAT or CABLE mode. ❏ Make sure this unit's power cord is connected securely to the wall outlet. ❏ Locate the unit at least 3-4 feet away from fluorescent lights. ❏ If the "High Temperature Warning!" message appears, turn off the TV and wait until the TV's projection lamp cools down (approximately 5 minutes). If the remote control still does not work, make sure to dust the ventilation slots on the rear of the TV and the cooling fan to provide adequate ventilation around the TV. ❏ If you are using the SXRD projection TV to change channels, first press FUNCTION repeatedly until the TV indicator lights up. ❏ If you are using another device to change channels, be sure you have not inadvertently switched your SXRD projection TV from the channel 3 or 4 setting. Use the Channel Fix option to "Fix" the channel based on the hookup you used (see page 116). ❏ If you are using another device to change channels, be sure to press FUNCTION for that device. For example, if you are using your cable box to change channels, be sure to press FUNCTION repeatedly until the SAT/CABLE indicator lights up. ❏ If you replaced the batteries to the remote recently, the code numbers for the video equipment may need to be reset. ❏ There may be more than one code for the equipment that you are attempting to operate. ❏ There is a possibility that some non-Sony equipment cannot be operated by your Sony SXRD projection TV remote. You may need to use the equipment's original remote control. CableCARD Problem Possible Remedies Problems using CableCARD or ❏ Check that the CableCARD is inserted properly (see pages 58-59). CableCARD services ❏ The CableCARD must be activated by your local cable TV provider before you can receive digital cable TV services. See the activation instructions on pages 58-59. ❏ Check the Diagnostics and CableCARD menu options (see page 126). (This can be useful in providing information to an authorized technician or repair person.) ❏ Contact your cable TV provider. 130