Sony KDS-70Q006 Owners Guide - Page 37
Cable or Antenna, Cable Type, Connect As Shown
View all Sony KDS-70Q006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setting Up the SXRD Projection TV Setting Up the SXRD Projection TV Cable or Antenna For best results, use one of the following connections if you are connecting a cable or an antenna and you: ❑ Do not need a cable box to unscramble channels. (If you have a cable box, see pages 37 and 38.) ❑ Do not intend to connect a VCR. (If you have a VCR, see pages 41 and 42.) The connection you choose depends on the cable type you have in your home, as described below. 75-ohm coaxial cable (usually found in newer homes) Cable Type Connect As Shown VHF Only or combined VHF/UHF 75-ohm coaxial cable Rear of SXRD Projection TV VHF/UHF Cable 75-ohm coaxial cable Rear of SXRD Projection TV CABLE 300-ohm twin lead cable (usually found in older homes) Cable Type Connect As Shown VHF Only or UHF Only or combined VHF/UHF 300-ohm twin lead cable Rear of SXRD Projection TV VHF/UHF Antenna connector (not supplied) 75-ohm coaxial and 300-ohm twin lead cable (found in some homes) Cable Type Connect As Shown VHF and UHF 75-ohm coaxial cable 300-ohm twin lead cable U/V mixer (not supplied) Rear of SXRD Projection TV VHF/UHF 35