Sony KDS-70Q006 Owners Guide - Page 24
with the lamp, then pull out the lamp., Attach the new lamp. - parts
View all Sony KDS-70Q006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Introducing the Sony SXRD Projection TV 4 Pull out the lamp. Loosen the screw on the lamp cover with a coin or similar object and slide the knob to the left. Put fingers on the right edge of the cover and pull it forward to remove the cover. Pull forward with fingers Loosen the two screws that hold the lamp using the hex key supplied with the lamp, then pull out the lamp. ✍ The lamp is very hot immediately after use. Never touch the front glass of the lamp or the surrounding parts. ✍ After it has cooled, place the used lamp into the empty box of the replacement lamp. Never put the used lamp into a plastic bag while the lamp is hot. ✍ Remove the dust inside the lamp slot with a vacuum cleaner, after pulling out the lamp. 5 Attach the new lamp. Making sure the front glass of the new lamp is facing the left side of the lamp slot, place the lamp and tighten the screws. 22