Sony MZ-NF610 Operating Instructions - Page 41

4 Press . or > repeatedly until the following item appears in the display, and then press ENTER. When labeling a track "T : Name" When labeling a "D : Name" disc The cursor flashes in the letter input area and the track, group, or disc is ready to be labeled. _ The cursor flashes. 5 Press VOL + or - to select a letter and press ENTER. The selected letter appears and the cursor moves to the next input position. The buttons used for character input and their functions are listed below. Functions Operations To select a character Press VOL + or -. To enter a letter Press ENTER. To enter a name Press ENTER for 2 seconds or more. To insert a blank space before the cursor Press END SEARCH and press VOL + at the same time. To delete a letter Press END SEARCH and press VOL - at the same time. To switch capital Press X. and small letters. To cancel labeling. Press x or MENU. 6 Repeat step 5, and then enter all characters of the label name. 7 Press ENTER for 2 seconds or more. A track or disc is labeled. To return the preceding settings Press x. To cancel labeling Press x for 2 seconds or more. Note When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. Re-labeling recordings Follow the procedure of the "Labeling" (page 40) to relabel a name. Note The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. For the remote control operation, see page 60. 41