Sony PCV-RX891 Online Help Center (VAIO User Guide) - Page 54
Installing Memory
View all Sony PCV-RX891 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installing Memory The amount of preinstalled memory may vary, depending on the system configuration you purchased. Your computer may ship with all available memory slots filled. See the online specifications sheet for details about the amount of memory installed in your computer. For memory replacement or upgrades, use only 2.5 V, 64-bit, PC2100 DDR-SDRAM Dual Inline Memory Modules (DIMM). You can purchase additional memory modules, accessories, and peripheral equipment from your local retailer. Observe the proper safety precautions when you add or remove the memory in your computer. See Before you upgrade your computer. To remove memory 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and all peripheral devices. 3. Remove the side panel. See Removing the Side Panel. 4. Gently place the unit on its side. If necessary, remove any cables, add-on boards, or other components to access the DIMM slots. 5. Locate the memory module(s) you wish to remove. 6. Push down on the latches located on both sides of the module to gently eject it from the slot. 7. Grasp one edge of the module and lift it out. Store the module in a static-free bag. Rem ov ing/Installing m em ory (PCV- RZ series m odel) Page 54