Sony PCV-RX891 Online Help Center (VAIO User Guide) - Page 56

To avoid damaging a DIMM slot, move the end latches slightly outward to relieve pressure.

Get Sony PCV-RX891 - Vaio Desktop Computer PDF manuals and user guides View all Sony PCV-RX891 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

10. Press down evenly against the DIMM's upper corners. The end latches snap into position, holding the module in place. To avoid damaging a DIMM slot, move the end latches slightly outward to relieve pressure. The module clicks into place. 11. Reinstall any components or add-on cards you may have removed. 12. Reinstall the power supply by following these steps: 1. Rotate the power supply unit to its original position and slide it into the chassis until the tab snaps into position. 2. Replace the screw that secures the power supply to the chassis. 13. Replace the side panel. See Replacing the Side Panel. Page 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
10.
Press down evenly against the DIMM's upper corners. The end latches snap into position, holding the module in
place.
To avoid damaging a DIMM slot, move the end latches slightly outward to relieve pressure. The
module clicks into place.
11.
Reinstall any components or add-on cards you may have removed.
12.
Reinstall the power supply by following these steps:
1.
Rotate the power supply unit to its original position and slide it into the chassis until the tab snaps
into position.
2.
Replace the screw that secures the power supply to the chassis.
13.
Replace the side panel. See
Replacing the Side Panel
.
Page 56