Sony RM-AV2500 Operating Instructions (primary manual) - Page 26
While pressing the LIGHT button, press the SYSTEM CONTROL, button A, B or C or the number - reset
View all Sony RM-AV2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Executing a Series of Commands - System Control Functions (continued) 2 While pressing the LIGHT button, press the SYSTEM CONTROL button (A, B or C) or the number key (1 - 9) of which programmed commands you want to erase. The program for the selected button is erased. When you want to set a new program to this SYSTEM CONTROL button, follow Steps 2 to 6 on pages 23 and 24. To erase the SYSTEM CONTROL A or C button At the factory, the SYSTEM CONTROL A button is preset with a series of power-off commands for Sony components and the SYSTEM CONTROL C button with a series of power-on commands for Sony components. To erase the programmed commands for each button, follow the steps below. 1 While pressing COMMANDER OFF, press the MORE button. 2 While pressing the LIGHT button, press the SYSTEM CONTROL button (A or C). The program for the selected button is erased. To set the SYSTEM CONTROL A or C button back to the factory setting To reset them to the factory settings, follow the steps below. 1 While pressing COMMANDER OFF, press the MORE button. 2 While pressing the LIGHT button, press the SYSTEM CONTROL button (A or C). Note The interval setting (page 29) is not reset to the factory setting, even if you perform these steps. 26