Sony RM-AV2500 Operating Instructions (primary manual) - Page 40
Receiving the data, While pressing COMMANDER, OFF, press CHANNEL - and, VOLUME -.
View all Sony RM-AV2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Transferring Data between Remote Commanders (continued) 2 Press the r button. Receiving the data This Commander can receive the data of another Sony RM-AV2500. To receive the all data from another remote commander 3 4 2 1 R: Transfer data r: Receive data 3 Press the 1 key. 1: All data of the Commander 2: Data of a Component Select button 4 Press the ENTER key. 1 While pressing COMMANDER OFF, press CHANNEL - and VOLUME -. As the data is received, the corresponding component name stays lit. If the all data have been successfully received, the backlight of the display turns off. Notes • If the Commander is not ready for receiving the data, press CLEAR key, then OK key to clear the learned signal on all or one of the Component Select buttons. • If "NG" appears during data transfer, go back to Step 3 and continue the operation or press COMMANDER OFF to stop the operation. If you continue the operation, you have to set the sending remote commander again to send data. 40