Sony RM-AV2500 Operating Instructions (primary manual) - Page 55
Troubleshooting - problems
View all Sony RM-AV2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Troubleshooting If you have problems setting up or using the Remote Commander, first check the batteries (page 6), then check the items below. Symptom You cannot operate the components. Remedy • Go closer to the component. The maximum operating distance is approximately 32.8 ft. (10 m). • Check that you are aiming the Commander directly at the compoent, and that there are no obstructions between the Commander and the component. • Turn on the components first, if necessary. • Check that the component has infrared remote capability. For example, if your component did not come with a remote commander, it probably is not capable of being controlled by a remote commander. • You have assigned a different component to the Component Select button. Check the component assigned to that button and the component code. • If you do not use the commander for a long time, LCD panel response may become erratic. In this case, follow the procedure below: 1 While pressing COMMANDER OFF, press MENU and EXIT. A bullet mark will appear in the bottom left of the LCD panel. 2 Press the next target that appears in the top right of the LCD panel. 3 Press the square that appears in the center of the LCD panel. A beep sounds to confirm the setting. Continued 55