Sony RM-AV2500 Operating Instructions (primary manual) - Page 37
Notes on learning the signals of an air-conditioner, Transferring Data between Remote Commanders - remote codes for
View all Sony RM-AV2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Notes on learning the signals of an air-conditioner About seasonal adjustments If you change the settings of the airconditioner for the season, you have to program the remote control signals of the new settings on the Commander. If the power-on/off operation does not work correctly The air-conditioner may not be turned on or off properly with the button of this Commander, for which you have programmed its power-on/off signal. If the Commander can operate only "ON" with one button and "OFF" with another, while your air-conditioner's remote control can operate "ON/OFF" with a single button, program the signal on two buttons of the Commander as follows. 1 Clear the learned power-on/off signal. (In the example on page 36, clear the learned signal from the SYSTEM CONTROL B button.) 2 Program the signal (transmitted from the power-on/off button of the airconditioner's remote control) for the SYSTEM CONTROL B button again. 3 Program the signal from the same button of the remote control for another button (for example, the SYSTEM CONTROL C button). The two buttons of the Commander have been programmed with the power-on signal and the power-off signal of the airconditioner, respectively so that you can operate the air-conditioner with the Commander. Transferring Data between Remote Commanders You can transfer data, such as learned signals and component code settings, between this Commander and another Sony RM-AV2500. Transferring data You can transfer the all data of this Commander or the data of a Component Select button on this Commander to another Sony RM-AV2500. To transfer the all data of the Commander 4 6 3 2 Continued 37