Sony SHAKE-X10D Operating Instructions - Page 13
Volume/dj Control Knob, Usb Rec/play Port
View all Sony SHAKE-X10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
(power) Turns on the system, or sets it to standby mode. (stop) --Stops playback. When pressed twice, resume playback can be canceled. --Stops transfer during music transfer. --Stops the built-in sound demonstration. (play) Starts playback. Hold down for more than 2 seconds, the built-in sound demonstration will be played back. To stop the demonstration, press . PARTY LIGHT (page 24, 55) LIGHT MODE (page 55) BLUETOOTH Selects BLUETOOTH function. BLUETOOTH indicator (page 39) PAIRING Hold down to activate BLUETOOTH pairing during BLUETOOTH function. REC TO USB Transfers music to the USB device connected to the (USB) port. MEGA BASS (page 45) MEGA BASS indicator Lights up when MEGA BASS sound effect is selected. (USB) (REC/PLAY) port Use to connect a USB device. This port can be used for both playback and music transfer. FUNCTION Selects a function. FLANGER (page 46) ISOLATOR (page 46) VOLUME/DJ CONTROL knob Adjusts the volume.* Adjusts the FLANGER and ISOLATOR effect or outputs the SAMPLER sound effect continuously (page 46). * You cannot use this knob to adjust the volume when DJ Effect is selected. (N-Mark) (page 42) GUITAR (page 54) GUITAR indicator Lights up when guitar mode is turned on. DJ OFF (page 47) SAMPLER (page 46) MIC1 jack Use to connect the microphone. MIC2/GUITAR jack Use to connect the microphone or guitar. Display VOCAL FADER (page 53) MIC ECHO (page 53) 13GB