Sony SHAKE-X10D Operating Instructions - Page 43
Setting the BLUETOOTH audio codecs, Setting the BLUETOOTH standby mode
View all Sony SHAKE-X10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
BLUETOOTH Setting the BLUETOOTH audio codecs You can enable AAC, LDAC or SBC codec reception from BLUETOOTH device. AAC/LDAC can be selected only when the BLUETOOTH device supports AAC/LDAC. 1 Press OPTIONS. 2 Press / repeatedly to select "BT CODEC", then press . 3 Press / repeatedly to select the setting, then press . •• "AUTO": Enable reception in AAC or LDAC codec format. •• "SBC": Receive in SBC codec format. To exit the options menu, press OPTIONS. Note ••You can enjoy high quality sound if AAC or LDAC is selected. If you cannot listen to AAC or LDAC sound from your device or the sound is interrupted, select "SBC". ••If you change this setting while the system is connected to a BLUETOOTH device, the BLUETOOTH device will be disconnected. To connect to the BLUETOOTH device, perform the BLUETOOTH connection again. Hint LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies such as SBC, it operates without any down-conversion of the Hi-Res Audio content*1, and allows approximately three times more data*2 than those other technologies to be transmitted over a BLUETOOTH wireless network with unprecedented sound quality, by means of efficient coding and optimized packetization. *1 Excluding DSD format contents. *2 In comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected. Setting the BLUETOOTH standby mode The BLUETOOTH standby mode enables the system to turn on automatically when you establish a BLUETOOTH connection from a BLUETOOTH device. 1 Press OPTIONS. 2 Press / repeatedly to select "BT STBY", then press . 3 Press / repeatedly to select the setting, then press . •• "ON": The system turns on automatically even when the system is in standby mode. •• "OFF": Turns off this function. To exit the options menu, press OPTIONS. 43GB