Sony SHAKE-X10D Operating Instructions - Page 67
Precautions, No Disc, No Music, No Video, Not In Use, Not Supported, Over Current, Protected
View all Sony SHAKE-X10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
NO DISC There is no disc in the unit. NO MUSIC No supported audio files exist in the playback source. NO VIDEO No supported video files exist in the playback source. NOT IN USE You tried to perform a specific operation under conditions where that operation is prohibited. NOT SUPPORTED An unsupported USB device is connected, or the USB device is connected through a USB hub. OVER CURRENT An over current from the port was detected. (USB) PROTECTED The USB device is write-protected. PUSH STOP You tried to perform an operation that can be performed only when the playback is stopped. READING The system is reading information of the disc or USB device. Some operations are not available. REC ERROR The transfer did not start, stopped partway, or otherwise could not be performed. TRACK FULL You cannot transfer onto the USB device because the number of files has reached its maximum. Precautions When carrying the unit To avoid damaging the disc mechanism, perform the following procedure before carrying the unit. Use the buttons on the unit to perform this operation. 1 Press to turn on the system. 2 Press FUNCTION repeatedly to select "DVD/CD". 3 Remove the disc. Press to open and close the disc tray. Wait until "NO DISC" appears on the display. 4 Unplug the AC power cord (mains lead). Additional Information Notes on discs ••Before playing, wipe the disc with a cleaning cloth from the center outward to the edge. ••Do not clean discs with solvents, such as benzine, thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. ••Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave them in a car parked in direct sunlight. On safety ••Completely disconnect the AC power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. ••Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. ••AC power cord (mains lead) must be changed only at the qualified service shop. 67GB