Sony SHAKE-X10D Operating Instructions - Page 63
Control for HDMI BRAVIA, There is severe hum, noise, or
View all Sony SHAKE-X10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Connection is not possible. •• The BLUETOOTH device you attempted to connect does not support the A2DP profile, and cannot be connected with the system. •• Enable the BLUETOOTH function of the BLUETOOTH device. •• Establish a connection from the BLUETOOTH device. •• The pairing registration information has been erased. Perform the pairing operation again. •• Erase the pairing registration information of the BLUETOOTH device (page 41) and perform the pairing operation again (page 40). The sound skips or fluctuates, or the connection is lost. •• The system and the BLUETOOTH device are too far apart. •• If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. •• If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. The sound of your BLUETOOTH device cannot be heard on this system. •• Increase the volume on your BLUETOOTH device first, then adjust the volume using +/-. There is severe hum, noise, or distorted sound. •• If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. •• If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. •• Turn down the volume of the connected BLUETOOTH device. Control for HDMI ("BRAVIA" Sync) The system does not turn on even when the TV is turned on. •• Press SETUP, then set [HDMI SETUP] - [CONTROL FOR HDMI] to [ON] (page 35). The TV must support the Control for HDMI function (page 47). For details, refer to the operating instructions of your TV. •• Check the speaker settings of the TV. The system power syncs with the speaker settings of the TV. For details, refer to the operating instructions of your TV. •• If the sound was output from the TV's speakers the previous time, the system does not turn on even when the TV is turned on. The system turns off when the TV is turned off. •• Check the setting of [HDMI SETUP] - [STANDBY LINKED TO TV] (page 35). When [STANDBY LINKED TO TV] is set to [ON], the system turns off automatically when you turn off the TV regardless of the input. Additional Information 63GB