Sony SHAKE-X10D Operating Instructions - Page 65

--Tuner-related devices: up to 4 devices --Audio system (receiver/ headphone): up to 1 device (used by this system) Party Chain Party Chain function cannot be activated. •• Check the connections (page 50). •• Make sure the audio cables are connected correctly. "PARTY CHAIN" is flashing on the display. •• You cannot select AUDIO IN function if you make connection  (page 50) during Party Chain function. Select other function (page 52). •• Press PARTY CHAIN on the unit. •• Restart the system. Party Chain function does not work properly. •• Turn off the system. Then, turn it back on again to activate the Party Chain function. Resetting the system If the system still does not operate properly, reset the system to factory default settings. Use the buttons on the unit to perform this operation. 1 Unplug the AC power cord (mains lead), then plug it back in. 2 Press  to turn on the system. 3 Hold down DJ OFF and  for about 3 seconds. "RESET" appears on the display. After the reset completes, the system automatically reboots. Press  to turn on the system. All user-configured settings, such as preset radio stations are reset to factory default setting (except for some setup menu settings). To reset all setup menu settings, see "Returning the setup menu settings to the default" (page 65). Returning the setup menu settings to the default You can return the setup menu settings (except for [PARENTAL CONTROL] settings) to the default settings. 1 Press SETUP. The setup menu appears on the TV screen. 2 Press / repeatedly to select [SYSTEM SETUP], then press . 3 Press / repeatedly to select [RESET], then press . 4 Press / repeatedly to select [YES], then press . It takes a few seconds to complete. Do not press  while resetting the system. Additional Information 65GB