Sony SHAKE-X10D Operating Instructions - Page 22
To listen to TV sound via the system, If CODE 01 and SGNL ERR appear on the display of the unit
View all Sony SHAKE-X10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
To listen to TV sound via the system If you do not connect the system to the TV's HDMI IN (ARC) jack, make this connection. Audio cable (not supplied) AUDIO OUT To listen to TV sound, press FUNCTION +/- repeatedly to select "TV". Alternatively, press FUNCTION on the unit repeatedly. Hint ••You can also enjoy the sound of external equipment (DVD players, etc.) via the system by connecting to the AUDIO/PARTY CHAIN IN (TV) jack as connection above. For details, refer to the operating instructions of your equipment. ••If the audio output level from the system is low when connecting the external equipment, try adjusting the audio output settings on the connected equipment. It may improve the audio output level. For details, refer to the operating instructions of your equipment. If "CODE 01" and "SGNL ERR" appear on the display of the unit When the audio input signals to the system are other than 2-channel Linear PCM signals, the messages "CODE 01" and "SGNL ERR" (indicate that the input audio signals are unsupported) appear on the display of the unit. In this case, select the proper audio output mode on the TV in order to output 2-channel Linear PCM audio signals. For details, refer to the operating instructions of your TV. 22GB