Sony SHAKE-X10D Operating Instructions - Page 69
Specifications, Inputs, Outputs, HDMI Disc player
View all Sony SHAKE-X10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
-- Use this system and BLUETOOTH device as closer to each other as possible. ••The radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system and BLUETOOTH device in the following locations: -- In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gases may be present -- Near automatic doors or fire alarms ••This system supports security functions that comply with BLUETOOTH specifications to ensure secure connections during communication using BLUETOOTH technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using BLUETOOTH technology. ••Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology. ••BLUETOOTH communication is not necessarily guaranteed with all BLUETOOTH devices that have the same profile as this system. ••BLUETOOTH devices connected with this system must comply with the BLUETOOTH specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the BLUETOOTH specification, there may be cases where the characteristics or specifications of the BLUETOOTH device make it impossible to connect, or may result in different control methods, display or operation. ••Noise may occur or the audio may cut off depending on the BLUETOOTH device connected with this system, the communications environment, or surrounding conditions. Specifications Inputs AUDIO/PARTY CHAIN IN (TV) L/R: Voltage 2 V, impedance 47 kilohms TV (ARC): Supported audio signal: 2-channel Linear PCM MIC1: Sensitivity 1 mV, impedance 10 kilohms MIC2/GUITAR: Sensitivity 1 mV, impedance 10 kilohms (When guitar mode is turned off.) Sensitivity 200 mV, impedance 1 Megaohm (When guitar mode is turned on.) Outputs AUDIO/PARTY CHAIN OUT L/R: Voltage 2 V, impedance 1 kilohm VIDEO OUT: Max. output level 1 Vp-p, unbalanced, Sync. negative load impedance 75 ohms HDMI OUT (TV): Supported audio signal: 2-channel Linear PCM (up to 48 kHz), Dolby Digital HDMI section Connector: Type A (19 pin) Disc player section System: Compact disc and digital audio and video system Additional Information 69GB