Sony SPP-A2780 Operating Instructions - Page 19
Getting Started, To enter the local area code For 10 digits, phone numbers users, LOCAL 1
UPC - 027242585263
View all Sony SPP-A2780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started To enter the local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 digits in the Caller ID list (area code + number). If a call does not match one of the local area codes you entered, the phone number will be registered with 11 digits in the Caller ID list (1 + area code + number). Some regions of the country allow you to have more than one local area code. (Up to five local area codes can be entered in this phone.) 1 Perform steps 1 and 2 on page 17. 2 Select the number ("LOCAL 1" to "LOCAL 5") to enter the local area code by turning Jog Dial. HOME : LOCAL 1: LOCAL 2: NEW OLD MASSAGE RING OFF 3 Press Jog Dial. "ENTER LOCAL AREA CODE 1" appears on the display when you select "LOCAL 1" in step 2. 4 Enter the three digits of the local area code using the dialing keys. 5 Press (PGM). You hear a long confirmation beep. Notes • If the local area code is already entered, it appears on the display in step 2. To enter a different local area code, see "To change the local area code" on page 20. • Do not allow more than 60 seconds to elapse during the operation procedure. • If the local area code is not correctly entered, "ERROR" will appear on the display and five short error beeps will be heard after (PGM) is pressed in step 5. Move the cordless handset closer to the base phone, make sure the base phone* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. Tips • When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. • To check the current local area code, perform steps 1 and 2. The local area code appears on the display for about 60 seconds. continued Getting Started 19US