Sony SPP-A2780 Operating Instructions - Page 22
Select Am/pm And, Press Jog Dial, Enter Mimute
UPC - 027242585263
View all Sony SPP-A2780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Step 6: Setting the day and time (continued) 5 Press Jog Dial. ENTER MIMUTE AND PRESS JOG DIAL 11:00 NEW OLD MASSAGE RING OFF 6 Set the minute (00 to 59) by turning Jog Dial. ENTER MINUTE AND PRESS JOG DIAL 11:01 NEW OLD MASSAGE RING OFF 7 Press Jog Dial. SELECT AM/PM AND PRESS JOG DIAL 11:01AMAM NEW OLD MASSAGE RING OFF 8 Select "AM" or "PM" by turning Jog Dial, and then press Jog Dial. You hear a long confirmation beep. Then the phone starts counting time. Notes • Do not allow more than 60 seconds to elapse during the operation procedure. • "SUN 12:00AM" on the display of the base phone flashes when the day and time is cleared due to a power interruption, or when you connect the base phone to the AC outlet for the first time. • If the current day and time are not set, you will not hear a time stamp when you play back recorded messages. • When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 8, move the cordless handset closer to the base phone, make sure the base phone* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. Tip When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. 22US Getting Started