Sony SPP-A2780 Operating Instructions - Page 92

Troubleshooting continued, Symptom, Remedy, Operating from an, outside phone, Answering machine

Page 92 highlights

Troubleshooting (continued) Answering machine Symptom Remedy Youcannothearanythingfrom • During playback, press (VOL +) on the base phone to the speaker. increase the answering volume. No time stamp is heard. • Makesurethedayandtimeareset(page21). • The day and time may have been cleared due to a power interruption. Set them again (page 21). You cannot record the greeting properly. • Keepyourmessagebetweentwosecondsandone minute. • Make sure you speak about 12 inches (30 cm) away from the microphone when recording. The phone does not record messages. • Checktheansweringmode.Thephonecannotrecord messages in announcement only mode (page 64). • Makesurethatthememoryisnotfull.Whenthe remaining recording area is less than 30 seconds, the phone switches to announcement only mode automatically. • Thephonedoesnotrecordamessagethatisshorter than two seconds. • Evenifthemessageislongerthanfourminutes,the phone only records up to four minutes. The phone does not accept your remote ID code (security code). • Makesureyoucallfromatouch-tonephone. • Make sure you entered your remote ID code (security code) within two seconds after you have entered (#). You hear error beeps when you • Make sure the remote ID code (security code) is enter your remote ID code correct. (security code). A long confirmation beep does • Enter your remote ID code (security code) while the not sound when you enter your greetingisbeingplayedback. remote ID code (security code). • Makesureyouarecallingfromatouch-tonephone. Operating from an outside phone 92US Additional Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

Additional Information
92
US
Troubleshooting (continued)
Symptom
You cannot hear anything from
the speaker.
No time stamp is heard.
You cannot record the greeting
properly.
The phone does not record
messages.
The phone does not accept
your remote ID code (security
code).
You hear error beeps when you
enter your remote ID code
(security code).
A long confirmation beep does
not sound when you enter your
remote ID code (security code).
Remedy
During playback, press
(VOL°+)
on the base phone to
increase the answering volume.
Make sure the day and time are set (page 21).
The day and time may have been cleared due to a
power interruption. Set them again (page 21).
Keep your message between two seconds and one
minute.
Make sure you speak about 12 inches (30 cm) away
from the microphone when recording.
Check the answering mode. The phone cannot record
messages in announcement only mode (page 64).
Make sure that the memory is not full. When the
remaining recording area is less than 30 seconds, the
phone switches to announcement only mode
automatically.
The phone does not record a message that is shorter
than two seconds.
Even if the message is longer than four minutes, the
phone only records up to four minutes.
Make sure you call from a touch-tone phone.
Make sure you entered your remote ID code (security
code) within two seconds after you have entered
(#)
.
Make sure the remote ID code (security code) is
correct.
Enter your remote ID code (security code) while the
greeting is being played back.
Make sure you are calling from a touch-tone phone.
Operating from an
outside phone
Answering machine