Sony SPP-A2780 Operating Instructions - Page 74

Operating from an outside phone, Setting the remote ID code (security code)

Page 74 highlights

Operating from an outside phone You can call from a touch-tone phone and pick up new messages recorded on the phone. First, you just set the remote ID code (security code) and turn on the answering function before going out. The remote ID code (security code) setting can only be made on the cordless handset. Setting the remote ID code (security code) Turn Press 1 Press (PGM). 2 Turn Jog Dial to choose "ANSWERING", and then press Jog Dial. 3 Turn Jog Dial to choose "SECURITY CODE", and then press Jog Dial. 4 Enter four digits of remote ID code (security code) between 0000 and 9999 using the dialing keys. 5 Press (PGM). The remote ID code (security code) is set, and you hear a long confirmation beep. Note Do not allow more than 60 seconds to elapse during the operation procedure. Tip When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. To change the remote ID code (security code) Enter a new remote ID code (security code). The new code will replace the old one. 74US Answering Machine Features

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

Answering Machine Features
74
US
Operating from an outside phone
You can call from a touch-tone phone and pick up new messages
recorded on the phone.
First, you just set the remote ID code (security
code) and turn on the answering function before going out.
The remote ID code (security code) setting can only be made on the
cordless handset.
Setting the remote ID code (security code)
1
Press
(PGM)
.
2
Turn Jog Dial to choose
“ANSWERING”, and then press
Jog Dial.
3
Turn Jog Dial to choose
“SECURITY
CODE”, and then
press Jog Dial.
4
Enter four digits of remote ID
code (security code) between
0000 and 9999 using the dialing
keys.
5
Press
(PGM)
.
The remote ID code (security
code) is set, and you hear a long
confirmation beep.
Note
Do not allow more than 60 seconds to elapse during the operation procedure.
Tip
When you select “(GO
BACK)”, you can return to the previous set display by
pressing Jog Dial.
To change the remote ID code (security code)
Enter a new remote ID code (security code).
The new code will replace
the old one.
Turn
Press