Sony SPP-A2780 Operating Instructions - Page 26
To check the station number assigned to the additional, cordless handset, HANDSET 2 - operating instructions
UPC - 027242585263
View all Sony SPP-A2780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Registering additional cordless handsets (continued) 3 Enter the 10 digits system ID by pressing the dialing keys. The system ID is shown on a sticker affixed to the bottom of the base phone. 4 Press (PGM). You hear a long confirmation beep and the assigned station number is displayed. System ID Notes • Do not allow more than 60 seconds to elapse during the operation procedure. • Once you add a cordless handset to the base phone system, you cannot change the station numbers, or cancel the additional registrations. • When you press any button other than (PGM) to use an unregistered cordless handset, the message "PLEASE REGISTER THIS HANDSET" will appear on the display, and five short error beeps will be heard. You must first register the cordless handset you want to add to the system. • If you try to register a cordless handset which you have already added to the system, the five short error beeps will be heard and the registration will be canceled. • If the registration is unsuccessful, "ERROR" will appear on the display, and five short error beeps will be heard after (PGM) is pressed in step 4. Move all the cordless handsets closer to the base phone, and then start over the procedure. To check the station number assigned to the additional cordless handset The station number of the cordless handset appears on the display of the cordless handset while it is seated on the charger. You can also utilize the supplied sticker of the station number and attaching on the cordless handset. (For details, see Operating Instructions of SPP-H273.) HANDSET 2 NEW OLD MASSAGE RING OFF 26US Getting Started