Sony SPP-A2780 Operating Instructions - Page 33
Making calls when the headset is connected, Making calls using the EZ Access function
UPC - 027242585263
View all Sony SPP-A2780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Making calls when the headset is connected When a headset (optional) is connected to the I (HEADSET) jack on the cordless handset, you can talk through the headset. Open Basics Making calls using the EZ Access function To set up the access number, see "Setting up the EZ Access function" on page 23. 1 Pick up the cordless handset from the charger. 2 Dial the phone number (e.g., 1-201-123-4567, or 011-...). 3 Press (EZ ACCESS). The system dials first, the access number set up with the EZ access function, and then the phone number you dialed in step 2. "TALK" appears on the display. TALK E12011234567 NEW OLD MASSAGE RING OFF 4 When you're done talking, press (OFF) or replace the cordless handset on the charger. Note If you have set up a phone number with the EZ access function, just press (EZ ACCESS) to dial the phone number (i.e. skip step 2). Additional tasks To Do this Adjust the cordless handset volume Set the VOL switch to H (high), M (middle) or L (low). Put a call on hold Press (HOLD). "HOLD" appears on the display. Press (HOLD) again or pick up the cordless handset from the charger (When Quick talk is set to "ON"; see page 40) to resume the conversation. Switch to tone dialing temporarily Press (*TONE) after you're connected. The line will remain in tone dialing until disconnected. Switch to another call ("call waiting" service*) Press (CALL WAITING/FLASH). Press (CALL WAITING/FLASH) again to return to the first caller. * You need to subscribe to this service from your telephone company. continued Basics 33US