Sony STR DA5500ES Operating Instructions - Page 114

114

GB

6

Press

V

/

v

repeatedly to select “Control

for HDMI,” then press

or

b

.

7

Press

V

/

v

repeatedly to select “ON,”

then press

.

The Control for HDMI function of the

receiver is activated.

8

Press GUI MODE to exit the GUI menu.

If the GUI menu is displayed, the Control

for HDMI function of the playback

components will not work properly.

9

Press one of the HDMI input buttons to

display the image of the playback

components for which you want to set

the Control for HDMI function.

10

Turn the Control for HDMI function of

the connected component on.

For details on setting the connected

component, refer to its operating

instructions.

11

Repeat steps 9 and 10 to set the

Control for HDMI function and to

display the image of all the playback

components you want to use.

By a simple operation (one-touch),

components connected to the receiver with

HDMI connections start automatically.

You can enjoy the sound/image using

connected components.

When you set

“

Pass Through

”

to

“AUTO”

or

“

ON,

”

sound and image can be output only

from the TV while the receiver remains in

standby mode.

Play back a connected component.

The receiver and TV are turned on

simultaneously, and sound and image are

output from the receiver and TV.

To use the One-Touch Play of

the camcorder

1

Turn the Control for HDMI function on

for both the receiver and your

camcorder.

2

Connect your camcorder to the HDMI

IN 1, IN 2, or IN 6 jack (page 33).

The receiver and TV are turned on

simultaneously, and sound and image are

output from the receiver and TV.

Notes

• Connect your camcorder to the HDMI IN 1, IN 2,

or IN 6 jack. The camcorder may not work

correctly if you connect it to the HDMI IN 3, IN 4,

or IN 5 jack.

• Depending on the TV, the start of the content may

not be output.

You can enjoy the TV sound from the speakers

connected to the receiver by a simple

operation.

Depending on the TV settings, while you are

watching the TV, the receiver turns on and

switches to the “TV” function automatically.

TV sound is output from the speakers

connected to the receiver, and the volume of

the TV is minimized simultaneously.

You can use the System Audio Control

function as follows.

•

The sound of the TV is output from the

speakers connected to the receiver when you

turn the receiver on while the sound is being

output from the TV speaker.

•

You can adjust the receiver’s volume when

you adjust the TV volume.

You can also operate this function using the

TV menu. For details, refer to the operating

instructions of the TV.

Playing back components with

one-touch operation (One-Touch

Play)

Enjoying the TV sound from the

speakers connected to the

receiver (System Audio Control)

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	21
1: Installing speakers	21
2: Connecting the monitor	25
3a: Connecting the audio components	27
3b: Connecting the video components	32
3c: Connecting the IR Blaster	42
4: Connecting the antennas (aerials)	44
5: Connecting to the network	45
6: Preparing the receiver and the remote	47
7: Setting the speakers	48
8: Calibrating the appropriate speaker settings automatically (Auto Calibration)	50
9: Configuring the network settings of the receiver	57
10: Preparing a computer to use as a server	58
Guide to on-screen display operation	59
Playback	62
Enjoying sound/images from the component connected to the receiver	62
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	64
Operating the TDM-iP50 using the GUI menu of the receiver	65
Tuning	68
Listening to FM/AM radio	68
Presetting FM/AM radio stations	71
Listening to satellite radio (USA/Canadian model only)	73
Connecting a satellite radio tuner	74
Preparing to listen to a satellite radio	74
Selecting a channel of the satellite radio	75
Presetting satellite radio channels	77
Restricting access to specific channels (Parental Lock) (SIRIUS only)	78
Enjoying Surround Sound	82
Playing back with 2-channel sound	82
Playing back with multi-channel surround	83
Enjoying a surround effect for music	86
Enjoying a surround effect for movies	88
Using Network Features	92
About the network functions of the receiver	92
What you can do with the home network function	93
Enjoying content stored on the server	96
Listening to Rhapsody	98
Listening to SHOUTcast	101
Features of the ES Utility application software	103
Using Multi-zone Features	105
What you can do with the Multi-zone function	105
Making a multi-zone connection	106
Setting the speakers in zone 2	108
Switching the zone setting of the remote	109
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	109
Listening to the same music in different zone (Party Mode)	110
Using Other Features	112
Using “BRAVIA” Sync features	112
Switching the monitors that output the HDMI video signals	116
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	116
Switching between digital and analog audio	117
Enjoying the sound/ images from other inputs (Input Assign)	118
Using the sleep timer	121
Enjoying the surround effect at low volume levels	122
Recording using the receiver	123
Switching the command mode of the receiver and the remote	124
Using a bi-amplifier connection	126
Adjusting Settings	127
Using the setting menu	127
Auto Calibration	128
Speaker settings	130
Surround settings	134
EQ settings	136
Multi Zone settings	136
Audio settings	138
Video settings	140
HDMI settings	142
Network settings	144
Quick Click settings	145
System settings	146
Operating without connecting to a TV	147
Operating Each Component Using the On-screen Remote (Quick Click)	153
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	153
Using Quick Click	154
Setting components that are operated by the on- screen remote	160
Performing several commands in sequence automatically with Quick Click (Macro Play)	165
Setting remote control codes that are not stored in Quick Click	167
Resetting the remote code for Quick Click	168
Operating Each Component Using the Multifunction Remote	170
Operating each component using the multifunction remote	170
Programming the remote	172
Performing several commands in sequence automatically (Macro Play)	175
Setting remote commander codes that are not stored in the remote	177
Clearing all the contents of the remote’s memory	179
Additional Information	180
Glossary	180
Precautions	184
Troubleshooting	185
Specifications	192

Sony STR DA5500ES Operating Instructions - Page 114

To use the One-Touch Play of, the camcorder, Playing back components

Page 114 highlights