Sony STR DA5500ES Operating Instructions - Page 167
Setting remote control codes that are not stored in Quick Click, Source Component, or
UPC - 027242754324
View all Sony STR DA5500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Operating Each Component Using the On-screen Remote (Quick Click) Setting remote control codes that are not stored in Quick Click V/v/B/b, MENU 6 Press V/v repeatedly to select "Learn Mode," then press . 7 Press V/v repeatedly to select the code number you want to store as the new command, then press . 8 Keep pressing the corresponding button on the remote of the component to be programmed while pointing the remote toward the receiver's remote sensor until "Complete" is displayed on the TV screen. Remote sensor About 5 cm - 10 cm (2" - 4") 1 Press MENU. The menu is displayed on the TV screen. 2 Press V/v repeatedly to select " Settings," then press or b. 3 Press V/v repeatedly to select "Quick Click," then press or b. 4 Press V/v repeatedly to select "Source Component," or "Common Component," then press . 5 Press V/v repeatedly to select the component you want, then press . "Test" is selected automatically after few seconds when the registration of a new code is completed. 9 Press . The operation test of the programmed code is started. Proceed to step 10 if you will not perform the operation test. 10Press V/v/B/b repeatedly to select "Finish," then press . Note The display window is turned off while the receiver is registering the new code. continued 167GB