Sony STR DA5500ES Operating Instructions - Page 137
INPUT for Main only, MAIN for Zone2 and Zone3, To adjust the volume for zone 2
UPC - 027242754324
View all Sony STR DA5500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
To adjust the volume for zone 2 You can adjust the volume in the main zone. If "Sur Back Assign" is set to "ZONE2" in the Speaker settings menu, you can also adjust the volume of zone 2. 1 Press V/v to select the zone for which you want to adjust the volume, then press . 2 Press B/b to select "Volume," then press . 3 Press V/v to adjust the volume, then press . To select the criteria for output of signals to control each zone You can turn the receiver on or off in another zone, or select various options for use of the 12V Trigger function. 1 Press V/v to select the zone you want, then press . 2 Press B/b to select "12V Trigger." 3 Press V/v to select the parameter, then press . x OFF Lets you turn off output of 12V triggers even when the main receiver is turned on. x CTRL Lets you turn the output of 12V triggers on or off manually using the CIS command of the external control device. x ZONE Lets you turn the output of 12V triggers on or off based on whether the selected zone is turned on or off. x INPUT (for "Main" only) Lets you turn on the output of 12V triggers when the preset input is selected. When you select "Input," the setting display which sets each input trigger to on/off appears. Press V/v to select the input, then press to check the box. x HDMI A (for "Main" only) Lets you turn the output of 12V triggers on or off based on the output setting of the HDMI OUT A jack. x HDMI B (for "Main" only) Lets you turn the output of 12V triggers on or off based on the output setting of the HDMI OUT B jack. x MAIN (for "Zone2" and "Zone3" only) Lets you link operation of trigger in zone 2 or zone 3 to the main receiver. Tips • Even when this receiver is standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the multifunction remote at the same time (SYSTEM STANDBY). • Only signals from components connected to the analog input jacks are output through the ZONE 2 OUT/ZONE 3 OUT jacks. No signals are output from components connected to only the digital input jacks. • When SOURCE is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT or ZONE 3 OUT jacks even when the multi-channel input is selected. The analog audio signals of the current function are output. • When "Tuner" is selected; the same type of radio station (FM/AM) selected in the main zone is set in zone 2 and zone 3. However, you can select the input other than "Tuner" in zone 2 and zone 3. • When the receiver in the main zone is turned off, or an input source other than "Tuner" is selected, you can select a radio station from AM or FM in zone 2 or zone 3. When two of the receivers in the main zone, zone 2 or zone 3 are turned off and an input source other than "Tuner" is selected, you can select a broadcast from FM/AM in one zone in which the receiver is turned on. 137GB Adjusting Settings