Sony STR DA5500ES Operating Instructions - Page 42
c: Connecting the IR Blaster
UPC - 027242754324
View all Sony STR DA5500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3c: Connecting the IR Blaster Attach the supplied IR Blaster to components connected to the receiver. You can control components connected to the receiver via the IR Blaster using the on-screen remote control. IR Blaster (supplied) Infrared transmitter Remote sensor Place the components and the IR Blaster as follows when you want to operate two components with the IR Blaster. IR Blaster Remote sensors If the infrared receivers on the two components do not line up as shown in the illustration on the left, you must purchase an optional IR Blaster (VM-50, not supplied) and install it. Note For details on how to set up a component, refer to the operating instructions of the component. Tip If the IR Blaster cable is too short, use a 3.5 mm jack extension cable (not supplied). 42GB