Sony STR DA5500ES Operating Instructions - Page 18
Multifunction remote, commander, RM-AAL021/RM-AAL022, Function, Saving the power in, standby mode. - avs
UPC - 027242754324
View all Sony STR DA5500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Multifunction remote commander (RM-AAL021/RM-AAL022) The RM-AAL021 remote is supplied with the European model only and RM-AAL022 is supplied with the USA/Canadian model only. The RM-AAL022 remote is used for illustration purpose. Any differences in operation are clearly indicated in the text, for example, "USA/Canadian model only." Name Function A AV ?/1 (on/ standby) B ?/1 (on/ standby) Press to turn on or off the audio/ video components that the remote is assigned to operate (page 172). If you press ?/1 (2) button at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes automatically each time you press the input button (5). Press to turn the receiver on or off. If zone 2 or zone 3 is selected, only the main receiver is turned on or off with this button. To turn off all components including an amplifier in zone 2 or zone 3, press ?/1 and AV ?/ 1 (1) at the same time (SYSTEM STANDBY). C ZONE D AMP E Input buttons F TV INPUT Saving the power in standby mode. When "Control for HDMI" (page 142) and "Installer Mode" (page 146) are set to "OFF," and the power for zone 2/zone 3 is turned off. Press to switch the zone 2 or zone 3 operation (page 105). Press to enable the receiver operation. Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components (page 62). You can program the remote to control non-Sony components following the steps in "Programming the remote" (page 172). Press TV (wf), then press TV INPUT to select the input signal of a TV. 18GB