Sony STR DA5500ES Operating Instructions - Page 49
To exit the menu, Press, repeatedly to select, Speaker, then press, Impedance, or 8, depending
UPC - 027242754324
View all Sony STR DA5500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Getting Started 3 Press V/v repeatedly to select "Speaker," then press or b. 4 Press V/v repeatedly to select "Impedance," then press . 5 Press V/v repeatedly to select "4 Ω" or "8 Ω" depending on the speakers you are using, then press . The parameter you have selected is entered. To exit the menu Press MENU. Notes • If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often on the back of the speaker.) • When you connect all speakers with a normal impedance of 8 ohms or higher, set "Impedance" to "8 Ω." When connecting other types of speakers, set it to "4 Ω." • When you connect front speakers to both the SPEAKERS A and B terminals, connect the speakers with a normal impedance of 8 ohms or higher. - When you connect speakers with impedance of 16 ohms or higher in both "A" and "B" configuration: Set "Impedance" to "8 Ω" in the Speaker settings menu. - For other types of speakers in other configurations: Set "Impedance" to "4 Ω" in the Speaker settings menu. 49GB