Sony STR DA5500ES Operating Instructions - Page 116

Switching the monitors that output the HDMI video signals When you have two monitors connected to the HDMI OUT A and HDMI OUT B jacks, you can switch the output for these two monitors using the HDMI OUTPUT button on the multifunction remote. This operation cannot be performed using the simple remote. ?/1 Outputting the HDMI signals even when the receiver is in standby mode (Pass Through) You can output the video and audio signals from the HDMI IN jack to the TV connected to the HDMI OUT jack even when the receiver is in standby mode. When you activate this function, make the settings for "Pass Through" following the steps below. V/v/b, HDMI OUTPUT MENU 1 Turn on the receiver and the two monitors. 2 Press HDMI OUTPUT. Each time you press the button, the output will be switched as follows: HDMI A t HDMI B t HDMI A + B t OFF t HDMI A... You can also use the HDMI OUT button on the receiver. Notes • If the compatible video format differs between the monitors connected to the HDMI OUT A jack and the HDMI OUT B jack of the receiver, "HDMI A + B" may not work. • Depending on the playback component you connect, "HDMI A + B" may not work. 1 Press MENU. The menu is displayed on the TV screen. 2 Press V/v repeatedly to select " Settings," then press or b. 3 Press V/v repeatedly to select "HDMI," then press or b. 116GB