Home » Sony Manuals » Stereo Systems » Sony STR DA5500ES » Manual Viewer

Sony STR DA5500ES Operating Instructions - Page 14

Pro Logic processing. This, DTS-HD Low Bit Rate

UPC - 027242754324

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Name P Dolby Digital Surround indicators ;D ;D+ ;D EX Q DTS-HD indicators DTS-HD MSTR LBR HI RES R ;TrueHD S L-PCM Function Lights up one of the respective indicators when the receiver is decoding the corresponding Dolby Digital format signals. Dolby Digital Dolby Digital Plus Dolby Digital Surround EX Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to "Analog." Light up when the receiver is decoding DTS-HD. Lights up constantly with the one of the following indicators. DTS-HD Master Audio DTS-HD Low Bit Rate Audio DTS-HD High Resolution Audio Lights up when the receiver is decoding Dolby TrueHD. Lights up when Linear PCM (Pulse Code Modulation) signals are input. 14GB Name T Dolby Pro Logic indicators Function Lights up one of the respective indicators when the receiver performs Dolby Pro Logic processing. This matrix surround decoding technology can enhance input signals. ;PL Dolby Pro Logic ;PLII Dolby Pro Logic II ;PLIIx U DTS(-ES) indicators Dolby Pro Logic IIx Note This indicator does not light when either the center speaker and surround speaker is not connected. Light up when DTS or DTS-ES signals are input. DTS Lights up when the receiver is decoding DTS signals. Either 96/24 or NEO:6 also lights up depending on the input signal format or decoding format. 96/24 DTS 96/24 (96 kHz/24 bit) decoding NEO:6 DTS Neo:6 Cinema/Music DTS-ES Lights up with the either following indicator depending on the input signal decoding format. DISCRETE DTS-ES Discrete 6.1 MATRIX DTS-ES Matrix 6.1 Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "Analog." V DSD Lights up when the receiver is receiving DSD (Direct Stream Digital) signals. W Neural-THX Lights up when the receiver applies Neural-THX processing to input signals.

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	21
1: Installing speakers	21
2: Connecting the monitor	25
3a: Connecting the audio components	27
3b: Connecting the video components	32
3c: Connecting the IR Blaster	42
4: Connecting the antennas (aerials)	44
5: Connecting to the network	45
6: Preparing the receiver and the remote	47
7: Setting the speakers	48
8: Calibrating the appropriate speaker settings automatically (Auto Calibration)	50
9: Configuring the network settings of the receiver	57
10: Preparing a computer to use as a server	58
Guide to on-screen display operation	59
Playback	62
Enjoying sound/images from the component connected to the receiver	62
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	64
Operating the TDM-iP50 using the GUI menu of the receiver	65
Tuning	68
Listening to FM/AM radio	68
Presetting FM/AM radio stations	71
Listening to satellite radio (USA/Canadian model only)	73
Connecting a satellite radio tuner	74
Preparing to listen to a satellite radio	74
Selecting a channel of the satellite radio	75
Presetting satellite radio channels	77
Restricting access to specific channels (Parental Lock) (SIRIUS only)	78
Enjoying Surround Sound	82
Playing back with 2-channel sound	82
Playing back with multi-channel surround	83
Enjoying a surround effect for music	86
Enjoying a surround effect for movies	88
Using Network Features	92
About the network functions of the receiver	92
What you can do with the home network function	93
Enjoying content stored on the server	96
Listening to Rhapsody	98
Listening to SHOUTcast	101
Features of the ES Utility application software	103
Using Multi-zone Features	105
What you can do with the Multi-zone function	105
Making a multi-zone connection	106
Setting the speakers in zone 2	108
Switching the zone setting of the remote	109
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	109
Listening to the same music in different zone (Party Mode)	110
Using Other Features	112
Using “BRAVIA” Sync features	112
Switching the monitors that output the HDMI video signals	116
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	116
Switching between digital and analog audio	117
Enjoying the sound/ images from other inputs (Input Assign)	118
Using the sleep timer	121
Enjoying the surround effect at low volume levels	122
Recording using the receiver	123
Switching the command mode of the receiver and the remote	124
Using a bi-amplifier connection	126
Adjusting Settings	127
Using the setting menu	127
Auto Calibration	128
Speaker settings	130
Surround settings	134
EQ settings	136
Multi Zone settings	136
Audio settings	138
Video settings	140
HDMI settings	142
Network settings	144
Quick Click settings	145
System settings	146
Operating without connecting to a TV	147
Operating Each Component Using the On-screen Remote (Quick Click)	153
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	153
Using Quick Click	154
Setting components that are operated by the on- screen remote	160
Performing several commands in sequence automatically with Quick Click (Macro Play)	165
Setting remote control codes that are not stored in Quick Click	167
Resetting the remote code for Quick Click	168
Operating Each Component Using the Multifunction Remote	170
Operating each component using the multifunction remote	170
Programming the remote	172
Performing several commands in sequence automatically (Macro Play)	175
Setting remote commander codes that are not stored in the remote	177
Clearing all the contents of the remote’s memory	179
Additional Information	180
Glossary	180
Precautions	184
Troubleshooting	185
Specifications	192

Match case Limit results 1 per page

Dolby

Digital

Surround

indicators

Lights up one of the

respective indicators when

the receiver is decoding the

corresponding Dolby

Digital format signals.

;

Dolby Digital

;

D+

Dolby Digital Plus

;

D EX

Dolby Digital Surround EX

Note

When playing a Dolby Digital

format disc, be sure that you

have made digital connections

and that INPUT MODE is not

set to “Analog.”

DTS-HD

indicators

Light up when the receiver

is decoding DTS-HD.

DTS-HD

Lights up constantly with

the one of the following

indicators.

MSTR

DTS-HD Master Audio

LBR

DTS-HD Low Bit Rate

Audio

HI RES

DTS-HD High Resolution

Audio

;

TrueHD

Lights up when the receiver

is decoding Dolby TrueHD.

L-PCM

Lights up when Linear

PCM (Pulse Code

Modulation) signals are

input.

Name

Function

Dolby

Pro Logic

indicators

Lights up one of the

respective indicators when

the receiver performs Dolby

Pro Logic processing. This

matrix surround decoding

technology can enhance

input signals.

;

Dolby Pro Logic

;

PLII

Dolby Pro Logic II

;

PLIIx

Dolby Pro Logic IIx

Note

This indicator does not light

when either the center speaker

and surround speaker is not

connected.

DTS(-ES)

indicators

Light up when DTS or

DTS-ES signals are input.

DTS

Lights up when the receiver

is decoding DTS signals.

Either 96/24 or NEO:6 also

lights up depending on the

input signal format or

decoding format.

96/24

DTS 96/24 (96 kHz/24 bit)

decoding

NEO:6

DTS Neo:6 Cinema/Music

DTS-ES

Lights up with the either

following indicator

depending on the input

signal decoding format.

DISCRETE

DTS-ES Discrete 6.1

MATRIX

DTS-ES Matrix 6.1

Note

When playing a DTS format

disc, be sure that you have

made digital connections and

that INPUT MODE is not set to

“Analog.”

DSD

Lights up when the receiver

is receiving DSD (Direct

Stream Digital) signals.

Neural-THX

Lights up when the receiver

applies Neural-THX

processing to input signals.

Name

Function