Sony STR DA5500ES Operating Instructions - Page 117
Switching between digital and analog audio, Press INPUT MODE on - compare
UPC - 027242754324
View all Sony STR DA5500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
4 Press V/v repeatedly to select "Pass Through," then press or b. 5 Press V/v repeatedly to select the parameter you want, then press or b. Parameter Explanation AUTO When the TV is turned on while the receiver is in the standby mode, the receiver outputs HDMI signals from the receiver's HDMI OUT A jack. Sony recommends this setting if you use a TV that is compatible with "BRAVIA" Sync. This setting saves power in the standby mode compared with the "ON" setting. ON When the receiver is in the standby mode, the receiver continuously outputs HDMI signals from the receiver's HDMI OUT A jack. OFF The receiver does not output HDMI signals when in the standby mode. Turn on the receiver to enjoy the connected component's source on the TV. This setting saves power in the standby mode, compared with the "ON" setting. Notes • This function does not work when you set "Control for HDMI" to "OFF." • This function is available only when you select "HDMI A" or "HDMI A + B" using the HDMI OUTPUT button. When you select "HDMI B" or "OFF," this function does not work. • When "AUTO" is selected, it may take a little more time for the picture and sound to be output to the TV than when "ON" is selected. Switching between digital and analog audio When you connect components to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch. INPUT SELECTOR INPUT MODE 1 Select the input source using INPUT SELECTOR on the receiver. 2 Press INPUT MODE on the receiver. The selected audio input mode appears on the TV screen. • Auto Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected. • Analog Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. Notes • Some audio input modes may not be set up depending on the input. Using Other Features continued 117GB