Sony STR-DA7100ES Operating Instructions - Page 116
Setting remote control codes that are not stored in the commander, To erase a programmed IR code
View all Sony STR-DA7100ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
To erase a programmed IR code 1 In step 5, move the easy scroll key to select "Common," then press the key to enter the selection. 2 Move the easy scroll key to select "NO SET," then press the key to enter the selection. To delay the output of an IR code 1 In step 5, move the easy scroll key to select "Common," then press the key to enter the selection. 2 Move the easy scroll key to select "WAIT TIME," then press the key to enter the selection. 3 Move the easy scroll key to select the time to delay the output of an IR code, then press the key to enter the selection. You can specify a delay of from 1 to 10 seconds (in 1 second increments). Notes • Pressing any of the following buttons during a macro play operation will cancel the macro play sequence before it is complete. - AV ?/1 - ?/1 - SYSTEM STANDBY - SOUND FIELD - INPUT SELECTOR - RM SET UP • When the Macro Play function does not work properly, set "WAIT TIME" between each operation. Setting remote control codes that are not stored in the commander When a remote control code is not one of the presets stored in the commander, it is possible for the commander to learn the code using the Learning function. 1 2,3, 4,6 1 Press RM SET UP. The set up list appears. 2 Move the easy scroll key to select "LEARNING," then press the key to enter the selection. The input list appears. 3 Move the easy scroll key to select the function for which you want to use the Learning input, then press the key to enter the selection. The button list appears. 4 Move the easy scroll key to select the button you want to use for the Learning function, then press the key to enter the selection. The display for the learning function appears. 116GB